T800. Model: . 
Torso. Model: .
Statistics: Posted by AmeraLabs — Mon Feb 26, 2018 4:34 am
]]>
]]>
Statistics: Posted by Ilios3D — Sun Apr 02, 2017 7:20 am
]]>
]]>
]]>
]]>
]]>
Me and some friends are creating a 3D DLP Printer using a 2100 lumen projector. but we're having some issues when it comes to finished prints. most of the objects we are printing becomes veiny, and it seems like the resin would no longer cure in certain areas. is this because of the photo polymer we are using, or is it the exposure time. we are currently using makerjuice g+ and it has been in use for a couple of months now.
I have submitted some photos below and i hope someone else have had theese types of issues and were able to fix it, please share the information
any other tips are also greatly apreciated
Statistics: Posted by Ninith — Tue Feb 07, 2017 9:17 am
]]>
Any updates?
Statistics: Posted by boelle — Tue Dec 27, 2016 11:20 am
]]>
]]>
Statistics: Posted by maxjewels — Tue Dec 13, 2016 6:56 pm
]]>
Have galvo but i don't want to use without f theta lens.
Only on the middle you can print and slic3r don't have spot compensation.
Do anyone knows good f theta lesn for sale cheap and do the job.
see photo
Statistics: Posted by goldi80 — Tue Dec 13, 2016 6:40 am
]]>
i do not have 32t pulley now is slow 2x. order for banngood it will take forever to come
i need to put 32t now it have 16t 200steps need to be 100steps 1/16 then is real fast and the arduino breath no calculation the weight is 22g laser and holder -
the problem is slicer dot or line from photo to gcode or .slc if you dont complicate gcode i get good small size txt and print. laser is hard to move proper
Regards
Statistics: Posted by goldi80 — Tue Dec 06, 2016 5:58 pm
]]>
Mr. LittleRP
Statistics: Posted by goopyplastic — Tue Dec 06, 2016 12:59 pm
]]>
Looking great!
cheers,
hp
Statistics: Posted by hp_ — Tue Dec 06, 2016 12:51 pm
]]>