Here is a picture of the machine. Apologies for overall lack of refinement...
Statistics: Posted by gmoneyphx — Thu Feb 13, 2014 9:26 am
]]>
Do you have any 'wiper' system/recoater blade for the meniscus?
Some images of your machine would be extremely helpful!
Statistics: Posted by tom-res — Tue Feb 11, 2014 4:08 pm
]]>
What projector are you using and what drivers are you using with the Mega 2560?
Thanks for sharing
Clinton
Statistics: Posted by Finhead — Mon Feb 10, 2014 3:30 pm
]]>
Frame/structure is 80/20 aluminum (3030 to be exact).
Z Axis is stepper driven stage I bought years ago on ebay (has a Kerk screw and anti-backlash nut)
Controller is Mega2560 board from Amazon.
Vat is a 4.5in square steel tube - 5" tall currently.
I have the projector mounted on an Igus linear bearing so I can adjust it vertically to change the print size (within limits).
Statistics: Posted by gmoneyphx — Mon Feb 10, 2014 3:26 pm
]]>
Statistics: Posted by tom-res — Sun Feb 09, 2014 10:00 pm
]]>
P.S, would clear resin work?, I can get gallons for free.
Statistics: Posted by johnrpm — Tue Feb 04, 2014 5:21 pm
]]>
Statistics: Posted by hp_ — Mon Feb 03, 2014 3:51 pm
]]>
Statistics: Posted by Finhead — Mon Feb 03, 2014 11:49 am
]]>
The widget was the first print from the system. Just a shape test really that included an angle, sharp corner, radius, fillet and square hole. 75 micron layers SubG+ .15% tan pigment. Had an aspect ratio problem due to my video driver. Was supposed to be cylindrical not elliptical...
This shoe is the second print from this new system. 62.5 micron layers printed in SubG+ .15% tan pigment.
I need to fine tune the exposure and pigment levels to get sharper details but overall less than 1 week from start to finish building this printer and I am very happy with the results.
Never ending thanks go Steve. Creation Workshop makes it possible to build a printer in 1 week!
Statistics: Posted by gmoneyphx — Mon Feb 03, 2014 7:14 am
]]>