Page 1 of 1
Adhesive for the light hood
Posted: Sat Feb 14, 2015 3:41 am
by ps_bond
Has anyone used Tensol 12 to glue the acrylic hood together? It's a solvent weld which seems to be suitable for transparent acrylics, it has limited gap filling capabilities but given the cut panels are quite close fitting it would seem to be a viable candidate.
Re: Adhesive for the light hood
Posted: Sat Feb 14, 2015 5:11 pm
by PomeroyB
I used standard liquid super glue, and it had 0 gap filling capabilities. Worked just fine for me. If Tensol 12 can dissolve the acrylic, you should be good!
Re: Adhesive for the light hood
Posted: Tue Feb 17, 2015 12:12 am
by goopyplastic
Foam safe super glue should work without melting or fogging the acyrlic.
Re: Adhesive for the light hood
Posted: Thu Feb 26, 2015 4:06 am
by ps_bond
Tensol 12 does work extremely well. Wicks into the joints nicely and leaves a good finish.