Page 1 of 1
CW 21 Manual Gcode window
Posted: Wed Jul 02, 2014 11:19 pm
by Phife
Hey guys,
Im recently upgraded to RC21 of CW and when I toggle the Manual Gcode switch nothing happens. I dont get any Gcode window to enter commands. Is anyone else having the problem?
Re: CW 21 Manual Gcode window
Posted: Thu Jul 03, 2014 3:30 am
by Finhead
Nope works perfect on the 3 laptops I have it installed on, Windows 8, 8.1 and 7
Re: CW 21 Manual Gcode window
Posted: Thu Jul 03, 2014 11:20 am
by PacManFan
I'll take a look, what kind of system are you running on?
Re: CW 21 Manual Gcode window
Posted: Thu Jul 03, 2014 11:58 am
by Phife
Yeah, Im not sure what the problem is.
Im running a laptop with Windows 7. Pressing the toggle switch does nothing, the switch moves but no window pops up. The other switches dont seem to do anything either although I havent really tested it that much.
Re: CW 21 Manual Gcode window
Posted: Thu Jul 03, 2014 12:29 pm
by Phife
I think I figured it out.. If I dont have the "Projector Control" check box on in machine controls I dont get the Gcode window.. but if it is checked, then pressing the Manual Gcode toggle lets the gcode popup work. I had turned off all the extra stuff since I only have a Z axis and no projector. I'll just leave it on till you can fix that problem.